This week we have a how-to video describing the build of Thunder Mesa's stone based water tank. I describe the techniques and materials used to create realistic random stone walls, and reveal my secret for perfect graphics on model structures. To go further in depth, he's a gallery of photos from the build as it came together step by step.
The tank base was carved from Balsa Foam II, and then painted with acrylics. Mortar between the stones is spackling compound pressed into the cracks. The doors and wooden trim were stained a warm gray, then dabbed sparingly with rubber cement. These pieces were then painted and the rubber cement rubbed away to create the look of old, peeling paint. The lone window is a modified Grandt Line casting, and the old fashioned rippled glass effect was created by painting Woodland Scenics Realistic water on the back of the acrylic glazing and then drying it quickly with a hair dryer.
The tank and bands are printed paper. I created the entire tank as a graphic in Adobe Photoshop, including the herald, water stains and weathering, and then printed it out on heavy matte inkjet paper. It was then wrapped around a scratchbuilt cylinder and the tank bands were cut from a second printout and applied individually for a 3-D look. White metal tank band fasteners and spout hardware from Wiseman Model Services complete the look. The spout yoke, water depth gauge, and roof hatch were scratchbuilt from scale wood and paper. The paper shingles are from Bar Mills and the roof finial is the head of a dress pin painted copper.
A 5mm yellow LED was added to the hollowed out interior for illumination, and the entire structure weathered with powdered chalks before being installed on the layout. Dimensions are called out at the end of the video if you would like to build a similar tank for yourself.
Thanks for following along, amigos. Registered users can leave questions and comments below so, please, join in the conversation!
All the best,
2 thoughts on “Building a Stone Based Water Tank”
Beautiful work as is always the case in your tremendous modeling. Excellent video too. Was curious if you use a template, or other tool to scratch out the stones on the Balsa Foam?.. They are perfect stones’… I always enjoy viewing your phenomenal presentations.”’
Thank you, Tony. I don’t use a template per se, but I do measure and lightly draw lines on the foam to mark the positions of doors and windows, and to keep the mortar lines more or less straight.
Comments are closed.